Publications (Scopus Indexed List Only)

2510 entries « 3 of 26 »

2021

Sujatha, S., Bapat, G.M., Dash, S.S.

GRID: a model for the development of assistive devices in developing countries (Journal Article)

Disability and Rehabilitation: Assistive Technology, 16 (3), pp. 317-323, 2021, (cited By 0).

(Links | BibTeX | Tags: )

2020

Anandteerth, Sahu, S., Sundararajan, T.

3D-eulerian-lagrangian simulation of transient spray from a multi-hole GDI injector: Influence of injection and ambient pressures (Conference)

2020, (cited By 0).

(Links | BibTeX | Tags: )

Kumar, A., Sahu, S.

Effect of air swirl and nozzle geometry on flapping instability of liquid jet in an air-blast atomizer (Conference)

2020, (cited By 0).

(Links | BibTeX | Tags: )

Harish, B., Eswara Sai Kumar, K., Srinivasan, B.

Topology optimization using convolutional neural network (Journal Article)

Lecture Notes in Mechanical Engineering, pp. 301-307, 2020, (cited By 0).

(Links | BibTeX | Tags: )

Kumar, K.E.S., Sundaramoothy, A., Natarajan, S., Rakshit, S.

Shape optimization of beams with scaled boundary finite element method and b-splines (Journal Article)

Lecture Notes in Mechanical Engineering, pp. 213-224, 2020, (cited By 1).

(Links | BibTeX | Tags: )

V M, J., Ambatipudi, M.K., S, V.

The Phenomenon of Flame Jump in Counter–current Flame Propagation in Biomass Packed Beds–Experiments and Theory (Journal Article)

Combustion Science and Technology, 2020, (cited By 0).

(Links | BibTeX | Tags: )

Sahu, S.K., Roy, C., Chatterjee, D.

Investigation of the blockage effect on flow past a circular cylinder (Journal Article)

Interfacial Phenomena and Heat Transfer, 8 (2), pp. 93-105, 2020, (cited By 0).

(Links | BibTeX | Tags: )

Ambatipudi, M.K., Varunkumar, S.

Experimental and Theoretical Investigations on High-ash Coal-air Flames in High-speed Jets Stabilized Recirculating Flow (Journal Article)

Combustion Science and Technology, 2020, (cited By 0).

(Links | BibTeX | Tags: )

Patel, A., Shakya, P.

Early fault detection based on empirical mode decomposition method (Conference)

88 , 2020, (cited By 3).

(Links | BibTeX | Tags: )

Mahata, S., Shakya, P., Ramesh Babu, N., Prakasam, P.K.

In-process characterization of surface finish in cylindrical grinding process using vibration and power signals (Conference)

88 , 2020, (cited By 0).

(Links | BibTeX | Tags: )

Shibu K, J., Shankar, K., Babu, C.K., Degaonkar, G.K.

Three-objective optimization of aircraft secondary power system rotor dynamics (Journal Article)

Mechanics Based Design of Structures and Machines, 2020, (cited By 0).

(Links | BibTeX | Tags: )

Anureka, R., Srinivasan, K.

Passive control of pipe-jet noise using trailing-edge castellations (Journal Article)

Applied Acoustics, 170 , 2020, (cited By 0).

(Links | BibTeX | Tags: )

Kidangan, R.T., Venkata, K., Balasubramaniam, K.

Detection of dis-bond between honeycomb and composite facesheet of an Inner Fixed Structure bond panel of a jet engine nacelle using infrared thermographic techniques (Journal Article)

Quantitative InfraRed Thermography Journal, 2020, (cited By 0).

(Links | BibTeX | Tags: )

Sabapathy, K.A., Gedupudi, S.

On the influence of concrete-straw-plaster envelope thermal mass on the cooling and heating loads for different climatic zones of India (Journal Article)

Journal of Cleaner Production, 276 , 2020, (cited By 1).

(Links | BibTeX | Tags: )

Krishna Raja, D., Das, S.P.

Wave breaking and swirls in a circular cylindrical container during lateral sloshing (Journal Article)

Journal of Flow Visualization and Image Processing, 27 (3), pp. 319-332, 2020, (cited By 0).

(Links | BibTeX | Tags: )

Raja, D.K., Hopfinger, E.J., Das, S.P.

Conditions of inertial-viscous transition and related jetting in large cavity collapse (Journal Article)

Physical Review Fluids, 5 (12), 2020, (cited By 1).

(Links | BibTeX | Tags: )

Kumar, P., Tiwari, S.

Effects of size and position of upstream cylinder on wake transition in flow past two in-line square cylinders (Journal Article)

Journal of Flow Visualization and Image Processing, 27 (2), pp. 143-184, 2020, (cited By 0).

(Links | BibTeX | Tags: )

Majhy, B., Jain, S.K., Sen, A.K.

Attraction and Repulsion between Liquid Droplets over a Liquid-Impregnated Surface (Journal Article)

Journal of Physical Chemistry Letters, 11 (23), pp. 10001-10006, 2020, (cited By 1).

(Links | BibTeX | Tags: )

Guntreddi, B., Ghosh, A.

High-speed machining of aluminium alloy using vegetable oil based small quantity lubrication (Journal Article)

Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 2020, (cited By 2).

(Links | BibTeX | Tags: )

Gupta, S.K., Mittal, M.

Assessing the influence of compression ratio on engine characteristics including operational limits of a biogas-fueled spark-ignition engine (Journal Article)

Journal of Engineering for Gas Turbines and Power, 142 (12), 2020, (cited By 0).

(Links | BibTeX | Tags: )

Mannan Balaramakrishnan, T., Natarajan, S., Sujatha, S.

Design of a biomimetic sach foot: An experimentally verified finite element approach (Journal Article)

Journal of Biomimetics, Biomaterials and Biomedical Engineering, 45 , pp. 22-30, 2020, (cited By 1).

(Links | BibTeX | Tags: )

Sahu, A.K., Raghavan, V., Prasad, B.

Influence of frictional packing limit on hydrodynamics and performance of gas-solid fluidized beds (Journal Article)

Korean Journal of Chemical Engineering, 37 (12), pp. 2368-2383, 2020, (cited By 0).

(Links | BibTeX | Tags: )

Magham, H.S.R., Vijayaraghavan, L., Sankaran, S., Arunachalam, N.

Grindability studies of thermomechanically processed advanced high strength steel using sol-gel and fused alumina grain-based grinding wheels (Journal Article)

Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 2020, (cited By 1).

(Links | BibTeX | Tags: )

Puthiyaveettil, N., Renil Thomas, K., Myrach, P., Ziegler, M., Rajagopal, P., Balasubramaniam, K.

Defect detection in steel bars up to 600 °C using laser line thermography (Journal Article)

Infrared Physics and Technology, 111 , 2020, (cited By 1).

(Links | BibTeX | Tags: )

Veerabagu, A.S., Alreja, C., Subbiah, S.

Ductile-brittle transition detection in scratching of single crystal silicon using charged particle emissions (Conference)

87 , 2020, (cited By 0).

(Links | BibTeX | Tags: )

Mehta, K., Peeketi, A.R., Liu, L., Broer, D., Onck, P., Annabattula, R.K.

Design and applications of light responsive liquid crystal polymer thin films (Journal Article)

Applied Physics Reviews, 7 (4), 2020, (cited By 6).

(Links | BibTeX | Tags: )

Goswami, K., Samuel, G.L.

Monitoring of material-removal mechanism in micro-electrical discharge machining by pulse classification and acoustic emission signals (Journal Article)

Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 2020, (cited By 2).

(Links | BibTeX | Tags: )

Singh, N.P., Srinivasu, D.S., Ramesh Babu, N.

A study on the interaction of jet with constituent layers of multilayered structure in through kerfing with abrasive waterjets (Journal Article)

Journal of Manufacturing Processes, 60 , pp. 117-133, 2020, (cited By 0).

(Links | BibTeX | Tags: )

Kukutla, P.R., Prasad, B.V.S.S.S., Tarigonda, H., Reddy, D.R.

Optimization of film hole row locations of a nozzle guide vane using network approach (Journal Article)

Journal of Thermal Analysis and Calorimetry, 2020, (cited By 1).

(Links | BibTeX | Tags: )

Muthu Kumaran, S., Raghavan, V.

Numerical study of characteristics of liquefied petroleum gas flames in coflow air (Journal Article)

Thermal Science and Engineering Progress, 20 , 2020, (cited By 0).

(Links | BibTeX | Tags: )

Swaroop, S.C., Das, S.P.

Effect of thermal buoyancy on flow past multiple cylinders in a vertical duct (Journal Article)

Heat Transfer Research, 51 (7), pp. 499-515, 2020, (cited By 0).

(Links | BibTeX | Tags: )

Ooi, E.T., Iqbal, M.D., Birk, C., Natarajan, S., Ooi, E.H., Song, C.

A polygon scaled boundary finite element formulation for transient coupled thermoelastic fracture problems (Journal Article)

Engineering Fracture Mechanics, 240 , 2020, (cited By 2).

(Links | BibTeX | Tags: )

Kakka, P., Anupindi, K.

Study of Heat Transfer Characteristics in a Wall-Bounded Plane-Jet Using Large-Eddy Simulation (Journal Article)

ERCOFTAC Series, 27 , pp. 247-255, 2020, (cited By 0).

(Links | BibTeX | Tags: )

Gurubalan, A., Maiya, M.P., Tiwari, S.

Performance characterization of a novel membrane-based liquid desiccant air conditioning system [Caractérisation des performances d'un nouveau système de conditionnement d'air à membrane à déshydratant liquide] (Journal Article)

International Journal of Refrigeration, 120 , pp. 445-459, 2020, (cited By 1).

(Links | BibTeX | Tags: )

Natarajan, S., Aifantis, K.

Size effects in nanostructured Li-ion battery cathode particles (Journal Article)

Journal of the Mechanical Behavior of Materials, 29 (1), pp. 36-43, 2020, (cited By 1).

(Links | BibTeX | Tags: )

Huynh, H.D., Natarajan, S., Nguyen-Xuan, H., Zhuang, X.

Polytopal composite finite elements for modeling concrete fracture based on nonlocal damage models (Journal Article)

Computational Mechanics, 66 (6), pp. 1257-1274, 2020, (cited By 2).

(Links | BibTeX | Tags: )

Suresh, P.S., Sura, N.K., Shankar, K.

State estimation using filtering methods applied for aircraft landing maneuver (Journal Article)

Lecture Notes in Mechanical Engineering, pp. 339-352, 2020, (cited By 0).

(Links | BibTeX | Tags: )

Somasundharam, S., Reddy, K.S.

Inverse analysis for simultaneous estimation of temperature dependent thermal properties of isotropic materials (Journal Article)

Thermal Science and Engineering Progress, 20 , 2020, (cited By 0).

(Links | BibTeX | Tags: )

Nair, S., Mohapatra, P., Mittal, M.

Mathematical modeling of electrical heater assisted CO conversion in an oxidation catalyst at low loads and cold start conditions (Conference)

2020, (cited By 2).

(Links | BibTeX | Tags: )

Unnikrishnakurup, S., Dash, J., Ray, S., Pesala, B., Balasubramaniam, K.

Nondestructive evaluation of thermal barrier coating thickness degradation using pulsed IR thermography and THz-TDS measurements: A comparative study (Journal Article)

NDT and E International, 116 , 2020, (cited By 2).

(Links | BibTeX | Tags: )

Latha, A.M., Rayapureddy, S., Devi, N., Rajagopal, P., Balasubramaniam, K., Pesala, B.

Rapid nondestructive evaluation of defects in GFRP composites using terahertz line scanner (Conference)

11279 , 2020, (cited By 0).

(Links | BibTeX | Tags: )

Bembalge, O.B., Panigrahi, S.K.

Hot Workability and Processing Map of Ultrafine-Grained Al/SiC Composite with Different Reinforcement Sizes Under Compressive and Tensile Modes (Journal Article)

Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 51 (12), pp. 6679-6699, 2020, (cited By 0).

(Links | BibTeX | Tags: )

Kannan, K., Mansutti, D., Rajagopal, K.R., Urbini, S.

Mathematical Modeling of Rock Glacier Flow with Temperature Effects (Journal Article)

Springer INdAM Series, 38 , pp. 149-161, 2020, (cited By 1).

(Links | BibTeX | Tags: )

Madurai Elavarasan, R., Shafiullah, G.M., Raju, K., Mudgal, V., Arif, M.T., Jamal, T., Subramanian, S., Sriraja Balaguru, V.S., Reddy, K.S., Subramaniam, U.

COVID-19: Impact analysis and recommendations for power sector operation (Journal Article)

Applied Energy, 279 , 2020, (cited By 39).

(Links | BibTeX | Tags: )

Mohanty, S., Kumbhar, P.Y., Swaminathan, N., Annabattula, R.

A phase-field model for crack growth in electro-mechanically coupled functionally graded piezo ceramics (Journal Article)

Smart Materials and Structures, 29 (4), 2020, (cited By 2).

(Links | BibTeX | Tags: )

Dwivedi, V., Srinivasan, B.

Solution of biharmonic equation in complicated geometries with physics informed extreme learning machine (Journal Article)

Journal of Computing and Information Science in Engineering, 20 (6), 2020, (cited By 1).

(Links | BibTeX | Tags: )

Arjunbarath, G., Manivannan, P.V., Sujatha, C.

Development of Velocity Dependent Front Wheel Angle Relation Based on Tire Workload Distribution (Journal Article)

Lecture Notes in Mechanical Engineering, pp. 1322-1332, 2020, (cited By 0).

(Links | BibTeX | Tags: )

Ajanth, P., Sudeepthi, A., Sen, A.K.

Microfluidics Technology for Label-Free Isolation of Circulating Tumor Cells (Journal Article)

Journal of The Institution of Engineers (India): Series C, 101 (6), pp. 1051-1071, 2020, (cited By 1).

(Links | BibTeX | Tags: )

Jayaprakash, K.S., Sen, A.K.

Droplet breakup at a co-flowing fluid-fluid interface in a microchannel (Conference)

2020, (cited By 0).

(Links | BibTeX | Tags: )

Rapaka, S.D., Pandey, M., Annabattula, R.K.

Dynamic compressive behaviour of auxetic and non-auxetic hexagonal honeycombs with entrapped gas (Journal Article)

International Journal of Impact Engineering, 146 , 2020, (cited By 0).

(Links | BibTeX | Tags: )

Raj, A., Sen, A.K.

Cell migration through flexible micro-constriction (Conference)

2020, (cited By 0).

(Links | BibTeX | Tags: )

Dharmasastha, K., Samuel, D.G.L., Nagendra, S.M.S., Maiya, M.P.

Experimental investigation of thermally activated glass fibre reinforced gypsum roof (Journal Article)

Energy and Buildings, 228 , 2020, (cited By 1).

(Links | BibTeX | Tags: )

Jambukar, S., Sujatha, C.

Effects of Kingpin and Caster Offset on Braking Stability of Long Wheelbase Bus (Journal Article)

Lecture Notes in Mechanical Engineering, pp. 601-615, 2020, (cited By 0).

(Links | BibTeX | Tags: )

Zhang, J., Natarajan, S., Ooi, E.T., Song, C.

Adaptive analysis using scaled boundary finite element method in 3D (Journal Article)

Computer Methods in Applied Mechanics and Engineering, 372 , 2020, (cited By 5).

(Links | BibTeX | Tags: )

Harikrishnan, S., Tiwari, S.

Simulation of Fully Developed Flow and Heat Transfer in Wavy Channels Using OpenFOAM (Journal Article)

Lecture Notes in Mechanical Engineering, pp. 869-877, 2020, (cited By 1).

(Links | BibTeX | Tags: )

Phanendra Kumar, K., Mohanty, A., Lingappa, M.S., Srinath, M.S., Panigrahi, S.K.

Enhancement of surface properties of austenitic stainless steel by nickel based alloy cladding developed using microwave energy technique (Journal Article)

Materials Chemistry and Physics, 256 , 2020, (cited By 0).

(Links | BibTeX | Tags: )

Suresh, K., Shankar, K., Sujatha, C.

A Novel Passive Mechanism to Improve Induced Strain in Two-DOF Piezoelectric Energy Harvester (Journal Article)

Lecture Notes in Mechanical Engineering, pp. 1109-1116, 2020, (cited By 0).

(Links | BibTeX | Tags: )

Parmar, A., Ramkumar, P., Shankar, K.

Macro geometry multi-objective optimization of planetary gearbox considering scuffing constraint (Journal Article)

Mechanism and Machine Theory, 154 , 2020, (cited By 1).

(Links | BibTeX | Tags: )

Kumar, K.E.S., Rakshit, S.

Implementation of Topological Derivative as an Evolutionary Approach (Journal Article)

Lecture Notes in Mechanical Engineering, pp. 1511-1520, 2020, (cited By 0).

(Links | BibTeX | Tags: )

Dasi, K., Singh, S., Guruchethan, A.M., Maiya, M.P., Hafner, A., Banasiak, K., Neksa, P.

Performance evaluation of ejector based CO2 system for simultaneous heating and cooling application in an Indian dairy industry (Journal Article)

Thermal Science and Engineering Progress, 20 , 2020, (cited By 1).

(Links | BibTeX | Tags: )

Anish, R., Shankar, K.

Identification of Nonlinear Structural Parameters Using Combined Power Flow and Acceleration Matching Approaches (Journal Article)

Lecture Notes in Mechanical Engineering, pp. 1139-1149, 2020, (cited By 0).

(Links | BibTeX | Tags: )

Suresh, N., Balasubramaniam, K.

Quantifying the lowest remnant thickness using a novel broadband wavelength and frequency EMAT utilizing the cut-off property of guided waves (Journal Article)

NDT and E International, 116 , 2020, (cited By 2).

(Links | BibTeX | Tags: )

Singh, A., Prasad, B.V.S.S.S.

Computational Study of Slot Jet Impingement Heat Transfer on a Combined Dimpled and Protruded Concave Surface (Journal Article)

Lecture Notes in Mechanical Engineering, pp. 131-144, 2020, (cited By 0).

(Links | BibTeX | Tags: )

Patil, P., Reddy, K.S.

A semi-analytical solution to estimate an effective thermal conductivity of the two-phase building materials with spherical inclusions (Journal Article)

Heat and Mass Transfer/Waerme- und Stoffuebertragung, 56 (12), pp. 3209-3227, 2020, (cited By 0).

(Links | BibTeX | Tags: )

Manjeet, K., Sujatha, C.

Comparative Study of Performance of Optimized Valve for Different Flow Indices of Rheological Model (Journal Article)

Lecture Notes in Mechanical Engineering, pp. 1191-1202, 2020, (cited By 0).

(Links | BibTeX | Tags: )

Sathyanath, A., Meena, A.

Microstructural evolution and strain hardening behavior of heat-treated 17-4 PH stainless steel (Journal Article)

Materials Today Communications, 25 , 2020, (cited By 1).

(Links | BibTeX | Tags: )

Megalingam, A., Babu, V.

A numerical investigation of the compressible flow in the ejector of a vapour ejector refrigeration system (Journal Article)

Progress in Computational Fluid Dynamics, 20 (1), pp. 29-39, 2020, (cited By 0).

(Links | BibTeX | Tags: )

Kishor, E., Swaminathan, N.

Molecular-dynamics-based characterization and comparison of the radiation damage properties of three polytypes of cubic BC3 (Journal Article)

Sadhana - Academy Proceedings in Engineering Sciences, 45 (1), 2020, (cited By 0).

(Links | BibTeX | Tags: )

Lekshmi, M.V., Shiva Nagendra, S.M., Maiya, M.P.

Heterogeneous photocatalysis for indoor air purification: Recent advances in technology from material to reactor modeling (Journal Article)

Lecture Notes in Civil Engineering, 60 , pp. 147-166, 2020, (cited By 3).

(Links | BibTeX | Tags: )

Nair, S., Mittal, M.

An investigation on the performance of an oxidation catalyst using two-dimensional simulation with detailed reaction mechanism (Journal Article)

Chemical Product and Process Modeling, 15 (4), 2020, (cited By 0).

(Links | BibTeX | Tags: )

Puthiyaveettil, N., Thomas, K.R., Unnikrishnakurup, S., Myrach, P., Ziegler, M., Balasubramaniam, K.

Laser line scanning thermography for surface breaking crack detection : modeling and experimental study (Journal Article)

Infrared Physics and Technology, 104 , 2020, (cited By 8).

(Links | BibTeX | Tags: )

Raj, R.N., Shankar, K.

Multi-objective Goal Programming for Low Altitude Seat Ejections with Fuzzy Logic–Based Decision-making (Journal Article)

Human Factors and Mechanical Engineering for Defense and Safety, 4 (1), 2020, (cited By 2).

(Links | BibTeX | Tags: )

Loganathan, R., Mohiuddin, A., Gedupudi, S.

Experimental investigation of the effect of bypass inlet on flow boiling in a mini/micro-channel (Journal Article)

International Communications in Heat and Mass Transfer, 110 , 2020, (cited By 4).

(Links | BibTeX | Tags: )

Mittal, M., Suresh, S.A.

Determining the error levels in the calibration procedure when viewed through a transparent cylinder for engine flow diagnostics (Journal Article)

Sadhana - Academy Proceedings in Engineering Sciences, 45 (1), 2020, (cited By 0).

(Links | BibTeX | Tags: )

Chakkoth, U., Krishna, K.R., Ramkumar, M., Rao, P.V.C., Ravindran, P., Murali Krishnan, J.

Characterization of colloidal stability of blended bitumen (Journal Article)

Lecture Notes in Civil Engineering, 45 , pp. 883-894, 2020, (cited By 0).

(Links | BibTeX | Tags: )

Smestad, G.P., Germer, T.A., Alrashidi, H., Fernández, E.F., Dey, S., Brahma, H., Sarmah, N., Ghosh, A., Sellami, N., Hassan, I.A.I., Desouky, M., Kasry, A., Pesala, B., Sundaram, S., Almonacid, F., Reddy, K.S., Mallick, T.K., Micheli, L.

Modelling photovoltaic soiling losses through optical characterization (Journal Article)

Scientific Reports, 10 (1), 2020, (cited By 21).

(Links | BibTeX | Tags: )

Dixit, D.D., Pattamatta, A.

Effect of uniform external magnetic-field on natural convection heat transfer in a cubical cavity filled with magnetic nano-dispersion (Journal Article)

International Journal of Heat and Mass Transfer, 146 , 2020, (cited By 8).

(Links | BibTeX | Tags: )

DuttaRoy, R., Chakravarthy, S.R., Sen, A.K.

Experimental investigation of flame propagation in a meso-combustor (Journal Article)

Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 234 (8), pp. 1131-1146, 2020, (cited By 0).

(Links | BibTeX | Tags: )

Prasad, D., Kannan, K.

An analysis driven construction of distortional-mode-dependent and Hill-Stable elastic potential with application to human brain tissue (Journal Article)

Journal of the Mechanics and Physics of Solids, 134 , 2020, (cited By 1).

(Links | BibTeX | Tags: )

Pujari, A.K., Prasad, B.V.S.S.S., Sitaram, N.

Conjugate Heat Transfer Analysis on the Interior Surface of Nozzle Guide Vane with Combined Impingement and Film Cooling (Journal Article)

International Journal of Turbo and Jet Engines, 37 (4), pp. 327-342, 2020, (cited By 6).

(Links | BibTeX | Tags: )

Prakash, R.V., John, M., Carboni, M.

Estimation of Damage Due to Fatigue, Impact Loading in CFRP Laminates Through Multi-sampling Image Analysis Technique (Journal Article)

Lecture Notes in Mechanical Engineering, pp. 403-412, 2020, (cited By 0).

(Links | BibTeX | Tags: )

Jain, S., Gedupudi, S.

On the Prediction of Pressure Fluctuations and Pressure Drop Caused by Confined Bubble Growth During Flow Boiling in a Rectangular Mini/Micro-Channel (Journal Article)

Heat Transfer Engineering, 41 (21), pp. 1763-1783, 2020, (cited By 1).

(Links | BibTeX | Tags: )

Varde, P.V., Vinod, G., Prakash, R.V.

Preface (Journal Article)

Lecture Notes in Mechanical Engineering, pp. v-vi, 2020, (cited By 0).

(Links | BibTeX | Tags: )

Reddy, K.S., Parthiban, A., Mallick, T.K.

Numerical modeling of heat losses in a line focusing solar compound parabolic concentrator with planar absorber (Journal Article)

Applied Thermal Engineering, 181 , 2020, (cited By 0).

(Links | BibTeX | Tags: )

Dhaka, P., Prakash, R.V.

Influence of System Compliance on Contact Stresses in Fretting (Journal Article)

Lecture Notes in Mechanical Engineering, pp. 489-499, 2020, (cited By 0).

(Links | BibTeX | Tags: )

Gurubalan, A., Maiya, M.P., Geoghegan, P.J.

Tri-generation of air conditioning, refrigeration and potable water by a novel absorption refrigeration system equipped with membrane dehumidifier (Journal Article)

Applied Thermal Engineering, 181 , 2020, (cited By 2).

(Links | BibTeX | Tags: )

Guggilla, G., Narayanaswamy, R., Pattamatta, A.

An experimental investigation into the spread and heat transfer dynamics of a train of two concentric impinging droplets over a heated surface (Journal Article)

Experimental Thermal and Fluid Science, 110 , 2020, (cited By 9).

(Links | BibTeX | Tags: )

Manelil, N.P., Tiwari, S.

Effect of aspect ratio on wake flow characteristics of prolate spheroid at Re = 200 (Conference)

2293 , 2020, (cited By 1).

(Links | BibTeX | Tags: )

Argade, G.R., Panigrahi, S.K., Mishra, R.S.

Aging response on the stress corrosion cracking behavior of wrought precipitation-hardened magnesium alloy (Journal Article)

Journal of Materials Science, 55 (3), pp. 1216-1230, 2020, (cited By 5).

(Links | BibTeX | Tags: )

Rajita Shenoi, R., Manelil, N.P., Sundararajan, T., Tiwari, S.

Effect of diameter ratio on unsteady flow past two side-by-side cylinders at Re = 2000 (Conference)

2293 , 2020, (cited By 0).

(Links | BibTeX | Tags: )

Patil, S., Sahu, S.

Breakup dynamics in a twin-jet crossflow airblast atomizer (Conference)

2020, (cited By 1).

(Links | BibTeX | Tags: )

Parashar, N., Srinivasan, B., Sinha, S.S.

Modeling the pressure-Hessian tensor using deep neural networks (Journal Article)

Physical Review Fluids, 5 (11), 2020, (cited By 1).

(Links | BibTeX | Tags: )

Singh, N.P., Reddy, K.S.

Inverse heat transfer technique for estimation of focal flux distribution for a concentrating photovoltaic (CPV) square solar parabola dish collector (Journal Article)

Renewable Energy, 145 , pp. 2783-2795, 2020, (cited By 6).

(Links | BibTeX | Tags: )

Yadav, S.K., Nandigana, V.V.R., Nayak, P.K.

Sequential Growth of Two-dimensional MoSe2-WSe2 Lateral Heterojunctions (Conference)

2265 , 2020, (cited By 0).

(Links | BibTeX | Tags: )

Prakash, R.V., Kumar, R.S., Nagesha, A., Sasikala, G., Bhaduri, A.K.

Preface (Journal Article)

Lecture Notes in Mechanical Engineering, pp. vii-viii, 2020, (cited By 0).

(Links | BibTeX | Tags: )

Pilz da Cunha, M., Peeketi, A.R., Ramgopal, A., Annabattula, R.K., Schenning, A.P.H.J.

Light-Driven Continual Oscillatory Rocking of a Polymer Film (Journal Article)

ChemistryOpen, 9 (11), pp. 1149-1152, 2020, (cited By 3).

(Links | BibTeX | Tags: )

Naveen Raj, R., Shankar, K.

Using a coupled MDOF biodynamic model to study the effect of curvature of spine on lumbar spine compression under axial loads (Journal Article)

Lecture Notes in Computational Vision and Biomechanics, 32 , pp. 61-69, 2020, (cited By 0).

(Links | BibTeX | Tags: )

Pandian, K., Ajanth Praveen, M., Hoque, S.Z., Sudeepthi, A., Sen, A.K.

Continuous electrical lysis of cancer cells in a microfluidic device with passivated interdigitated electrodes (Journal Article)

Biomicrofluidics, 14 (6), 2020, (cited By 0).

(Links | BibTeX | Tags: )

Manish, M., Sahu, S.

Analysis of droplet clustering in air-assist sprays using Voronoi diagrams (Conference)

2020, (cited By 1).

(Links | BibTeX | Tags: )

Nehrujee, A., Andrew, H., Reetajanetsurekha, Patricia, A., Samuelkamaleshkumar, S., Prakash, H., Srinivasan, S., Balasubramanian, S.

A Plug-and-Train Robotic Kit (PLUTO) for Hand Rehabilitation: Pilot Usability Study (Conference)

2020-November , 2020, (cited By 0).

(Links | BibTeX | Tags: )

2510 entries « 3 of 26 »