Publications (Scopus Indexed List Only)

2510 entries « 2 of 26 »

2021

Kakka, P., Anupindi, K.

Flow and thermal characteristics of three-dimensional turbulent wall jet (Journal Article)

Physics of Fluids, 33 (2), 2021, (cited By 0).

(Links | BibTeX | Tags: )

Pillala, V.K.Y., Prasad, B.V.S.S.S., Sitaram, N., Mahendran, M., Biswas, D., Jimbo, T.

A linear cascade tunnel for flow investigations of steam turbine rotor tip blades in subsonic nucleating flows (Journal Article)

SN Applied Sciences, 3 (2), 2021, (cited By 0).

(Links | BibTeX | Tags: )

Kumar, P., Tiwari, S.

Effects of size ratio and inter-cylinder spacing on wake transition in flow past finite inline circular cylinders mounted on plane surface (Journal Article)

Physics of Fluids, 33 (2), 2021, (cited By 0).

(Links | BibTeX | Tags: )

Surendran, M., Lee, C., Nguyen-Xuan, H., Liu, G.R., Natarajan, S.

Cell-based smoothed finite element method for modelling interfacial cracks with non-matching grids (Journal Article)

Engineering Fracture Mechanics, 242 , 2021, (cited By 0).

(Links | BibTeX | Tags: )

Sahu, S., Chakraborty, A., Maurya, D.

Coriolis-induced liquid breakup and spray evolution in a rotary slinger atomizer: Experiments and analysis (Journal Article)

International Journal of Multiphase Flow, 135 , 2021, (cited By 2).

(Links | BibTeX | Tags: )

Sreejith, P., Kannan, K., Rajagopal, K.R.

A thermodynamic framework for additive manufacturing, using amorphous polymers, capable of predicting residual stress, warpage and shrinkage (Journal Article)

International Journal of Engineering Science, 159 , 2021, (cited By 0).

(Links | BibTeX | Tags: )

Guggilla, G., Narayanaswamy, R., Stephan, P., Pattamatta, A.

Influence of flow rate and surface thickness on heat transfer characteristics of two consecutively impinging droplets on a heated surface (Journal Article)

International Journal of Heat and Mass Transfer, 165 , 2021, (cited By 1).

(Links | BibTeX | Tags: )

Prattipati, R., Prasad, B.V.S.S.S.

Behavior of slip ratio during subcooled flow boiling in a vertical tube: A CFD approach (Journal Article)

International Journal of Thermal Sciences, 160 , 2021, (cited By 0).

(Links | BibTeX | Tags: )

Bembalge, O.B., Panigrahi, S.K.

Hot deformation behavior and processing map development of cryorolled AA6063 alloy under compression and tension (Journal Article)

International Journal of Mechanical Sciences, 191 , 2021, (cited By 4).

(Links | BibTeX | Tags: )

Nair, H.M., Sujatha, C.

Vehicle tip-over prevention using gain-scheduled State-dependent Riccati Equation–based anti-rollover controller (Journal Article)

Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 235 (2-3), pp. 807-828, 2021, (cited By 0).

(Links | BibTeX | Tags: )

Kashyap, V., Ramkumar, P.

Comprehensive analysis of geometrical parameters of crosshatched texture for enhanced tribological performance under biological environment (Journal Article)

Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 235 (2), pp. 434-452, 2021, (cited By 0).

(Links | BibTeX | Tags: )

Hirshikesh, Martínez-Pañeda, E., Natarajan, S.

Adaptive phase field modelling of crack propagation in orthotropic functionally graded materials (Journal Article)

Defence Technology, 17 (1), pp. 185-195, 2021, (cited By 6).

(Links | BibTeX | Tags: )

Dhal, A., Prathyusha, B., Kumar, R., Panigrahi, S.K.

Twin evolution and work-hardening phenomenon of a bulk ultrafine grained copper with high thermal stability and strength-ductility synergy (Journal Article)

Materials Science and Engineering A, 802 , 2021, (cited By 0).

(Links | BibTeX | Tags: )

Mantripragada, V.T., Sahu, S., Sarkar, S.

Morphology and flow behavior of buoyant bubble plumes (Journal Article)

Chemical Engineering Science, 229 , 2021, (cited By 0).

(Links | BibTeX | Tags: )

Chowdhury, I.U., Mahapatra, P.S., Sen, A.K.

Shape evolution of drops on surfaces of different wettability gradients (Journal Article)

Chemical Engineering Science, 229 , 2021, (cited By 1).

(Links | BibTeX | Tags: )

Singh, A., Chakravarthy, B., Prasad, B.V.S.S.S.

Numerical simulations and optimization of impinging jet configuration (Journal Article)

International Journal of Numerical Methods for Heat and Fluid Flow, 31 (1), pp. 1-25, 2021, (cited By 0).

(Links | BibTeX | Tags: )

Dwivedi, V., Parashar, N., Srinivasan, B.

Distributed learning machines for solving forward and inverse problems in partial differential equations (Journal Article)

Neurocomputing, 420 , pp. 299-316, 2021, (cited By 0).

(Links | BibTeX | Tags: )

Gaikwad, R., Sen, A.K.

An optomicrofluidic device for the detection and isolation of drop-encapsulated target cells in single-cell format (Journal Article)

Analyst, 146 (1), pp. 95-108, 2021, (cited By 1).

(Links | BibTeX | Tags: )

Singh, P., Khanna, S., Mudgal, V., Newar, S., Sharma, V., Sundaram, S., Reddy, K.S., Mallick, T.K., Becerra, V., Hutchinson, D., Radulovic, J., Khusainov, R.

Three dimensional analysis of dye-sensitized, perovskite and monocrystalline silicon solar photovoltaic cells under non uniform solar flux (Journal Article)

Applied Thermal Engineering, 182 , 2021, (cited By 0).

(Links | BibTeX | Tags: )

Raja, N., Balasubramaniam, K.

Experimental study on dispersion effects of f (1,1) wave mode on thin waveguide when embedded with fluid (Journal Article)

Sensors (Switzerland), 21 (2), pp. 1-12, 2021, (cited By 0).

(Links | BibTeX | Tags: )

Kumar Marri, G., Balaji, C.

Experimental and Numerical Investigations on a Phase Change Material Based Heat Sink with Symbiotically Joined Heat Pipe (Journal Article)

Heat Transfer Engineering, 42 (1), pp. 23-40, 2021, (cited By 0).

(Links | BibTeX | Tags: )

Somasundharam, S., Reddy, K.S.

Estimation of Spatially Distributed Thermal Properties of Heterogeneous Media with Non-Intrusive Measurement (Journal Article)

Heat Transfer Engineering, 42 (1), pp. 61-87, 2021, (cited By 0).

(Links | BibTeX | Tags: )

Bhaduri, S., Mallikarjuna, J.M.

Effect of Fuel Injection Mode on Performance and Emission Characteristics of a Spark-Ignition Engine - A Computational Fluid Dynamics Analysis (Conference)

(2021), 2021, (cited By 0).

(Links | BibTeX | Tags: )

Adak, D., Manzini, G., Natarajan, S.

The Mixed Virtual Element Method for the Richards Equation (Journal Article)

SEMA SIMAI Springer Series, 27 , pp. 259-297, 2021, (cited By 0).

(Links | BibTeX | Tags: )

Nair, S., Pavan, D., Mittal, M., Schock, H.

Visualization and pod analysis of spray variations in a gasoline direct-injection engine at different fuel injection pressures including split injection and macroscopic spray characteristics (Journal Article)

Journal of Flow Visualization and Image Processing, 28 (3), pp. 1-21, 2021, (cited By 0).

(Links | BibTeX | Tags: )

Arun, S., Sameen, A., Srinivasan, B., Girimaji, S.S.

Scale-space energy density function transport equation for compressible inhomogeneous turbulent flows (Journal Article)

Journal of Fluid Mechanics, 920 , 2021, (cited By 0).

(Links | BibTeX | Tags: )

Singh, A., Pujari, A.K., Prasad, B.V.S.S.S.

Conjugate heat transfer analysis of a rotor blade with coolant channels (Journal Article)

Heat Transfer, 2021, (cited By 0).

(Links | BibTeX | Tags: )

Ravi, R.R., Srinivasu, D.S., Behera, P.K.

Machining Thin-walled 2 1/2 D Structure in a Novel Aluminium Carbon Fiber Composite Material by the Abrasive Waterjets–an experimental investigation (Journal Article)

Advances in Materials and Processing Technologies, 2021, (cited By 1).

(Links | BibTeX | Tags: )

Tiwari, J., Pratheesh, P., Bembalge, O.B., Krishnaswamy, H., Amirthalingam, M., Panigrahi, S.K.

Microstructure dependent electroplastic effect in AA 6063 alloy and its nanocomposites (Journal Article)

Journal of Materials Research and Technology, 12 , pp. 2185-2204, 2021, (cited By 0).

(Links | BibTeX | Tags: )

Paliwal, V., Babu, N.R.

Prediction of stability boundaries in milling by considering the variation of dynamic parameters and specific cutting force coefficients (Conference)

99 , 2021, (cited By 0).

(Links | BibTeX | Tags: )

Mulay, S., Paliwal, V., Babu, N.R.

Analytical approach to predict the bend angle of sheet formed by multiple laser scans (Conference)

99 , 2021, (cited By 0).

(Links | BibTeX | Tags: )

Goswami, K., Samuel, G.L.

Support vector machine regression for predicting dimensional features of die-sinking electrical discharge machined components (Conference)

99 , 2021, (cited By 0).

(Links | BibTeX | Tags: )

Kshirsagar, S., Natarajan, S.

Design and analysis of O-ring polymer gasket for flanged bolted joints in seawater piping using α-FEM (Journal Article)

International Journal for Computational Methods in Engineering Science and Mechanics, 2021, (cited By 0).

(Links | BibTeX | Tags: )

Choudhury, S., Anupindi, K., Patnaik, B.S.V.

A study on the transport and interaction between blood flow and low-density-lipoprotein in near-wall regions of blood vessels (Journal Article)

Computer Methods in Biomechanics and Biomedical Engineering, 2021, (cited By 0).

(Links | BibTeX | Tags: )

Panbarasu, K., Ranganath, V.R., Prakash, R.V.

An experimental study on impact behavior of quasi-isotropic CFRP laminates (Conference)

44 , 2021, (cited By 0).

(Links | BibTeX | Tags: )

Paresi, P.R., Arunachalam, N., Lou, Y., Yoon, J.W.

Machinability studies of AA2024-T351 alloy with uncoated carbide tool (Conference)

44 , 2021, (cited By 0).

(Links | BibTeX | Tags: )

Prabakaran, A., Sarkar, A.

Natural frequencies of rotating cantilever plates (Journal Article)

Lecture Notes in Mechanical Engineering, 58 , pp. 433-439, 2021, (cited By 0).

(Links | BibTeX | Tags: )

Lee, C., Natarajan, S., Hale, J.S., Taylor, Z.A., Yee, J.-J., Bordas, S.P.A.

Bubble-enriched smoothed finite element methods for nearly-incompressible solids (Journal Article)

CMES - Computer Modeling in Engineering and Sciences, 127 (2), pp. 411-436, 2021, (cited By 0).

(Links | BibTeX | Tags: )

Dsouza, S.M., Hirshikesh, Mathew, T.V., Singh, I.V., Natarajan, S.

A non-intrusive stochastic phase field method for crack propagation in functionally graded materials (Journal Article)

Acta Mechanica, 2021, (cited By 0).

(Links | BibTeX | Tags: )

Tangella, R.G., Kumbhar, P., Annabattula, R.K.

Hybrid phase-field modeling of thermo-elastic crack propagation (Journal Article)

International Journal for Computational Methods in Engineering Science and Mechanics, 2021, (cited By 0).

(Links | BibTeX | Tags: )

Venkatesh, G., Gnanamoorthy, R., Okazaki, M.

Fretting wear behaviour of nickel foam struts used in fuel cell applications (Journal Article)

Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 2021, (cited By 0).

(Links | BibTeX | Tags: )

Manoj Kumar, K., Ghosh, A.

On grinding force ratio, specific energy, G-ratio and residual stress in SQCL assisted grinding using aerosol of MWCNT nanofluid (Journal Article)

Machining Science and Technology, 25 (4), pp. 585-607, 2021, (cited By 0).

(Links | BibTeX | Tags: )

Dsouza, S.M., Khajah, T., Antoine, X., Bordas, S.P.A., Natarajan, S.

Non Uniform Rational B-Splines and Lagrange approximations for time-harmonic acoustic scattering: accuracy and absorbing boundary conditions (Journal Article)

Mathematical and Computer Modelling of Dynamical Systems, 27 (1), pp. 290-321, 2021, (cited By 0).

(Links | BibTeX | Tags: )

Kshirsagar, S., Lee, C., Natarajan, S.

α -Finite Element Method for Frictionless and Frictional Contact including Large Deformation (Journal Article)

International Journal of Computational Methods, 2021, (cited By 0).

(Links | BibTeX | Tags: )

Gupta, M.V.N.S., Ameen, E., Unnikrishnakurup, S., Balasubramaniam, K., Veeraragavan, A., Pesala, B.

Spectral filtering of sub-bandgap radiation using all-dielectric gratings for thermophotovoltaic applications (Journal Article)

Journal of Photonics for Energy, 11 (1), 2021, (cited By 1).

(Links | BibTeX | Tags: )

Rajesh, R., Manivannan, P.V.

A Vision-Based Unstructured Road Detection Algorithm for Self-driving Cars (Journal Article)

Lecture Notes in Mechanical Engineering, pp. 369-379, 2021, (cited By 0).

(Links | BibTeX | Tags: )

Joseph Winston, S., Manivannan, P.V.

Optimal Path Planning of Steam Generator Tube Inspection System’s Robotic Manipulator Using Genetic Algorithm (Journal Article)

Lecture Notes in Mechanical Engineering, pp. 541-549, 2021, (cited By 0).

(Links | BibTeX | Tags: )

Tomy, A., Hiremath, S.S.

Machining, Characterization and Optimization: A Novel Approach for Machining Channels on Silicon Wafer Using Tailor-Made Micro Abrasive Jet Machining (Journal Article)

Silicon, 2021, (cited By 0).

(Links | BibTeX | Tags: )

Naveen Raj, R., Shankar, K.

A two stage neural network for choosing optimal ejection parameters in low altitude seat ejection based on novel injury parameter (Journal Article)

Optimization and Engineering, 2021, (cited By 0).

(Links | BibTeX | Tags: )

Ravikanth, G.S.G., Sujatha, C.

Simulation and experiments on three-wheeled vehicle on different tracks (Journal Article)

International Journal of Vehicle Performance, 7 (1-2), pp. 120-135, 2021, (cited By 0).

(Links | BibTeX | Tags: )

Singh, A., Prasad, B.V.S.S.S.

Optimization of Protrusions for an Impinging Jet on a Curved Surface (Journal Article)

Lecture Notes in Mechanical Engineering, pp. 117-126, 2021, (cited By 0).

(Links | BibTeX | Tags: )

Parmar, A., Ramkumar, P., Shankar, K.

Optimization of Planetary Gearbox Using NSGA-II (Journal Article)

Lecture Notes in Mechanical Engineering, pp. 367-376, 2021, (cited By 0).

(Links | BibTeX | Tags: )

Kashyap, V., Ramkumar, P.

Comparing Wettability and Frictional Performance of Laser Micro-machined Discrete and Continuous Textures (Journal Article)

Lecture Notes in Mechanical Engineering, pp. 185-192, 2021, (cited By 0).

(Links | BibTeX | Tags: )

Jacob, K.S., Samuel, G.L.

Effect of micro double helical grooved tools on performance of electric discharge drilling of Ti-6Al-4V (Journal Article)

Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 2021, (cited By 0).

(Links | BibTeX | Tags: )

Raghavendran, R., Meena, A., Amirthalingam, M.

Microstructure evolution during strain-induced transformation of austenite in an austempered ductile iron (ADI) (Journal Article)

Materials Science Forum, 1016 MSF , pp. 1199-1204, 2021, (cited By 0).

(Links | BibTeX | Tags: )

Madhavi, J.B., Hiremath, S.S.

Generation and Characterization of Borosilicate Glass Nanoparticles using in-House Developed μ-ECDM Setup (Journal Article)

Silicon, 2021, (cited By 0).

(Links | BibTeX | Tags: )

Harikrishnan, S., Tiwari, S.

Effect of Top Wall Configuration on Unsteady Flow and Heat Transfer Characteristics of Sinusoidal Wavy Channels (Journal Article)

Heat Transfer Engineering, 2021, (cited By 0).

(Links | BibTeX | Tags: )

Dillard, L., Nandigana, V., Gore, J.P.

Artificial intelligence application in combustion modeling (Conference)

2021, (cited By 0).

(Links | BibTeX | Tags: )

Baskaran, K., Srinivasan, K.

Aeroacoustic modal analysis of underexpanded pipe jets with and without an upstream cavity (Journal Article)

Physics of Fluids, 33 (1), 2021, (cited By 2).

(Links | BibTeX | Tags: )

Kumar S, S., Hiremath, S.S.

Temperature-dependent rheological properties of viscoelastic polymer based flexible abrasive media for finishing process (Journal Article)

Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 2021, (cited By 0).

(Links | BibTeX | Tags: )

Raja, D.K., Das, S.P.

Effect of liquid depth on dynamics and collapse of large cavities generated by standing waves (Journal Article)

Physics of Fluids, 33 (1), 2021, (cited By 0).

(Links | BibTeX | Tags: )

Paul, L., Hiremath, S.S.

Model Prediction and Experimental Study of Material Removal Rate in Micro ECDM Process on Borosilicate Glass (Journal Article)

Silicon, 2021, (cited By 0).

(Links | BibTeX | Tags: )

Nema, J.K., Gupta, S., Thakkar, R., Rajagopal, P.

Novel hermetically sealed device to realize unconventional phonon blockade at near-micron dimensions and milliKelvin temperatures (Journal Article)

AIP Advances, 11 (1), 2021, (cited By 0).

(Links | BibTeX | Tags: )

Muthuselvan, G., Rao, M.S., Iyengar, V.S., Pulumathi, M., Thirumalachari, S., Srinivasan, K.

Effect of lean primary-zone operation on emissions and stability of non-premixed combustors (Journal Article)

Journal of Propulsion and Power, 37 (1), pp. 47-58, 2021, (cited By 0).

(Links | BibTeX | Tags: )

Changela, K., Hariharan, K., Digavalli, R.K.

Stress Relaxation Study of Ultrafine-Grained AA 6061 Alloy Processed Through Combined Constrained Groove Pressing and Cold Rolling (Journal Article)

Lecture Notes in Mechanical Engineering, pp. 111-121, 2021, (cited By 0).

(Links | BibTeX | Tags: )

Hunyadi-Gall, M., Narayanaswamy, K., Hockner, E., Innerkofler, M., Badiali, L., Seshadri, K., Williams, F.A.

Experimental and computational investigation of extinction and autoignition of propane and n-heptane in nonpremixed flows (Journal Article)

Proceedings of the Combustion Institute, 38 (2), pp. 2257-2263, 2021, (cited By 0).

(Links | BibTeX | Tags: )

Dass, A., Gedupudi, S.

Numerical investigation on the heat transfer coefficient jump in tilted single-phase natural circulation loop and coupled natural circulation loop (Journal Article)

International Communications in Heat and Mass Transfer, 120 , 2021, (cited By 2).

(Links | BibTeX | Tags: )

Karmakar, N., Subbiah, S.

A comprehensive numerical model for kerf width prediction in hot wire cutting of expanded polystyrene (Journal Article)

Journal of Manufacturing Processes, 61 , pp. 322-333, 2021, (cited By 0).

(Links | BibTeX | Tags: )

Saini, R.S.T., Kumar, H., Chandramohan, S., Srinivasan, S.

Optimal Design of Rotary Magneto-Rheological Drum Brake for Transfemoral Prosthesis (Journal Article)

Lecture Notes in Mechanical Engineering, pp. 465-474, 2021, (cited By 0).

(Links | BibTeX | Tags: )

Suresh, P.R., Sundararajan, T., Srinivasan, K., Das, S.K.

Experimental investigation of the influence of Reynolds number and buoyancy on the flow development of a plane jet in the transitional regime (Journal Article)

Journal of Turbulence, 22 (1), pp. 26-47, 2021, (cited By 0).

(Links | BibTeX | Tags: )

Pratoori, R., Meena, R.K., Ghosh, P., Annabattula, R.K.

Coupled diffusion–deformation behavior of stimuli-responsive thin polymer films (Journal Article)

Mechanics of Materials, 152 , 2021, (cited By 2).

(Links | BibTeX | Tags: )

Koodalil, D., Rajagopal, P., Balasubramaniam, K.

Bond stiffness estimation with shear horizontal guided waves generated using PPM-EMATs (Journal Article)

International Journal of Adhesion and Adhesives, 104 , 2021, (cited By 1).

(Links | BibTeX | Tags: )

Dinachandra, M., Durga Rao, S.S., Sethuraman, R.

Isogeometric Collocation for Time-Harmonic Waves in Acoustic Problems (Journal Article)

Lecture Notes in Mechanical Engineering, pp. 543-554, 2021, (cited By 0).

(Links | BibTeX | Tags: )

Korade, A.T., Rakshit, S.

Optimum Support Layout Design for Periodically Loaded Structures Using Topology Optimization (Journal Article)

Lecture Notes in Mechanical Engineering, pp. 149-156, 2021, (cited By 0).

(Links | BibTeX | Tags: )

Kumar, K.E.S., Rakshit, S.

Optimal Design of Structure with Specified Fundamental Natural Frequency Using Topology Optimization (Journal Article)

Lecture Notes in Mechanical Engineering, pp. 85-93, 2021, (cited By 0).

(Links | BibTeX | Tags: )

Patil, S., Sahu, S.

Spray Characterization and Structure Analysis in a Model LPP Atomizer (Journal Article)

Lecture Notes in Mechanical Engineering, pp. 671-680, 2021, (cited By 0).

(Links | BibTeX | Tags: )

Manoj Kumar, Mallikarjuna, J.M.

Experimental Investigation on a Compression Ignition Engine with Blends of Plastic Oil and Diesel as Fuel (Journal Article)

Lecture Notes in Mechanical Engineering, pp. 85-97, 2021, (cited By 0).

(Links | BibTeX | Tags: )

Shet, V.V., Sekhar, A.S., Prasad, B.V.S.S.S.

Experimental Study of Temperature Effect on Labyrinth Seal Leakage and Vibration Characteristics of Rotor (Journal Article)

Lecture Notes in Mechanical Engineering, pp. 227-236, 2021, (cited By 0).

(Links | BibTeX | Tags: )

Buchaiah, S., Shakya, P.

Rolling Element Bearing Fault Diagnosis by Different Data Fusion Techniques (Journal Article)

Lecture Notes in Mechanical Engineering, pp. 341-350, 2021, (cited By 0).

(Links | BibTeX | Tags: )

Joseph Shibu, K., Shankar, K., Kanna Babu, C., Degaonkar, G.K.

Clustering in Pareto Front: Application on an Aero Engine Rotor-Bearing System for Improved Design (Journal Article)

Lecture Notes in Mechanical Engineering, pp. 141-153, 2021, (cited By 0).

(Links | BibTeX | Tags: )

M Manish, Sahu, S.

Optical characterization of droplet clusters and group combustion in spray diffusion flames (Journal Article)

Proceedings of the Combustion Institute, 38 (2), pp. 3409-3416, 2021, (cited By 0).

(Links | BibTeX | Tags: )

Simhan, D.R., Ghosh, A.

High vacuum active brazing of cBN with improved composite filler: Microstructure, interfaces and performance evaluation (Journal Article)

Vacuum, 183 , 2021, (cited By 1).

(Links | BibTeX | Tags: )

Marri, G.K., Balaji, C.

Experimental and numerical investigations on the effect of porosity and PPI gradients of metal foams on the thermal performance of a composite phase change material heat sink (Journal Article)

International Journal of Heat and Mass Transfer, 164 , 2021, (cited By 8).

(Links | BibTeX | Tags: )

Korobeinichev, O.P., Trubachev, S.A., Joshi, A.K., Kumar, A., Paletsky, A.A., Tereshchenko, A.G., Shmakov, A.G., Glaznev, R.K., Raghavan, V., Mebel, A.M.

Experimental and numerical studies of downward flame spread over PMMA with and without addition of tri phenyl phosphate (Journal Article)

Proceedings of the Combustion Institute, 38 (3), pp. 4867-4875, 2021, (cited By 0).

(Links | BibTeX | Tags: )

Sankar, B., Manjunath, P., Hemanth Kumar, A., Brijeshkumar, S., Sekhar, A.S., Jana, S.

Effecting critical frequency shift in rotors using active magnetic bearings (Journal Article)

Lecture Notes in Mechanical Engineering, pp. 527-538, 2021, (cited By 0).

(Links | BibTeX | Tags: )

Guntreddi, B., Ghosh, A.

Anti-frictional role of diamond and graphite suspended bio-oil based nano-aerosols at sliding interface of Al-SiCp and WC-6Co (Journal Article)

Tribology International, 153 , 2021, (cited By 0).

(Links | BibTeX | Tags: )

Vallabhuni, S.K., Johnson, P.N., Shu, B., Narayanaswamy, K., Fernandes, R.X.

Experimental and kinetic modeling studies on the auto-ignition of methyl crotonate at high pressures and intermediate temperatures (Journal Article)

Proceedings of the Combustion Institute, 38 (1), pp. 223-231, 2021, (cited By 2).

(Links | BibTeX | Tags: )

Akula, R., Gopinath, A., Rangarajan, S., Balaji, C.

Experimental and numerical studies on heat transfer from a PCM based heat sink with baffles (Journal Article)

International Journal of Thermal Sciences, 159 , 2021, (cited By 2).

(Links | BibTeX | Tags: )

Sabapathy, K.A., Gedupudi, S.

In situ thermal characterization of rice straw envelope of an outdoor test room (Journal Article)

Journal of Building Engineering, 33 , 2021, (cited By 1).

(Links | BibTeX | Tags: )

Anish, R., Shankar, K.

Non-linear structural parameter identification using instantaneous power flow balance approach (Journal Article)

Inverse Problems in Science and Engineering, 29 (5), pp. 636-662, 2021, (cited By 0).

(Links | BibTeX | Tags: )

Maity, R.K., Sundararajan, T., Velusamy, K.

An accurate interface reconstruction method using piecewise circular arcs (Journal Article)

International Journal for Numerical Methods in Fluids, 93 (1), pp. 93-126, 2021, (cited By 0).

(Links | BibTeX | Tags: )

Nehrujee, A., Guguloth, S., Reethajanetsurekha, Selvaraj, S., Srinivasan, S., Balasubramanian, S.

Design of Single Degree-of-Freedom Mechanisms for Hand Neurorehabilitation (Journal Article)

Lecture Notes in Mechanical Engineering, pp. 773-788, 2021, (cited By 0).

(Links | BibTeX | Tags: )

Pathak, M., Gautam, M., Rakshit, S.

Contact Analysis of a Gear Pair Using Linear Complementarity (Journal Article)

Lecture Notes in Mechanical Engineering, pp. 239-253, 2021, (cited By 0).

(Links | BibTeX | Tags: )

Toshniwal, S.S., Prakash, R.V.

Energy Absorption Characteristics of Single and Double-Walled Square Tubes Subjected to Axial Crushing (Journal Article)

Lecture Notes in Mechanical Engineering, pp. 361-369, 2021, (cited By 0).

(Links | BibTeX | Tags: )

Anand Kumar, S., Dumpala, R., Uday Venkat Kiran, K., Gnanamoorthy, R.

Investigation on Elevated Temperature Tribological Performance of Alloy 718 (Journal Article)

Lecture Notes in Mechanical Engineering, pp. 629-636, 2021, (cited By 0).

(Links | BibTeX | Tags: )

Mani Kalyani, A., Jaganathan, V.M., Varunkumar, S.

Mechanisms governing the “gasification to char oxidation transition” in counter-current flame propagation in packed beds: insights from single-particle experiments (Journal Article)

Particulate Science and Technology, 39 (4), pp. 490-494, 2021, (cited By 0).

(Links | BibTeX | Tags: )

Manimaran, A., Hiremath, S.S.

Simulation of cryogenic high pressure regulator dynamics (Journal Article)

Advances in Materials and Processing Technologies, 7 (1), pp. 54-70, 2021, (cited By 0).

(Links | BibTeX | Tags: )

Kolliyil, J.J., Yarramsetty, N., Balaji, C.

Numerical Modeling of a Wicked Heat Pipe Using Lumped Parameter Network Incorporating the Marangoni Effect (Journal Article)

Heat Transfer Engineering, 42 (9), pp. 787-801, 2021, (cited By 0).

(Links | BibTeX | Tags: )

Mathew, R., Hiremath, S.S.

Control of stepper motor driven differential drive robot for tracking waypoint trajectories: modeling, simulation, optimization and experimental investigations (Journal Article)

International Journal of Modelling and Simulation, 41 (3), pp. 176-194, 2021, (cited By 0).

(Links | BibTeX | Tags: )

Mahalingam, I., Padmanabhan, C.

A novel alternate multibody model for the longitudinal and ride dynamics of a tracked vehicle (Journal Article)

Vehicle System Dynamics, 59 (3), pp. 433-457, 2021, (cited By 2).

(Links | BibTeX | Tags: )

2510 entries « 2 of 26 »